东莞同亿工程塑料有限公司长期供应工程塑料:HOSTAFORM C9021,SABIC Cycoloy ,IUPILON , Multilon ,Lupoy ,Noryl ,XYRON ,Iupiace,VALOX , CCP PBT ,Leona,Grilon,EKONOL,VECTRA,Zytel HTN,DURACON,FORMOCON,Grivory,Ticona,Hostaform,CELCON,Ultraform,AMILUS,Iupital,AMODEL,Zenite,Ultramid,Polyone,ARLEN,Kuraray,Akulon,Durethan,Stanyl,CELANEX,AMILAN,GRILAMID,UBE,Ryton, FORTRON,FORTRON,DIC,KUMHO,Novamid,Luran,Rynite,Zytel,MINLON,Homo polypropylene,Impact polypropylene,Random polypropylene,Glass Fiber,Talc,FDA food contact,SABIC LEXAN ,Bayer Makrolon ,Teijin Panlite ,M-EP ,LG-Dow Calibre ,Kotex ,Touflon ,PC+POLYESTE(PC/PET),SABIC Xylex ,PC/PBT ,Bayblend PBT/PC ,SABIC Xenoy, SABIC VALOX ,DURANEX , Cycoloy ,IUPILON , Multilon ,Lupoy ,Noryl ,XYRON ,Iupiace , VALOX , CCP PBT ,Leona,Grilon,EKONOL,VECTRA,Zytel HTN,DURACON,FORMOCON,Grivory,Ticona,Hostaform,CELCON,Ultraform,AMILUS,Iupital,AMODEL,Zenite,Ultramid,Polyone,ARLEN,Kuraray,Akulon,Durethan,Stanyl,CELANEX,AMILAN,GRILAMID,UBE,Ryton ALL plastic resin grades及各种食品级工程塑料,玻纤增强工程塑料,碳纤增强工程塑料,矿物增强工程塑料,阻燃工程塑料,抗紫外线、抗静电、导电、增韧、耐寒改性工程塑料.
 
 
 
Bayer Bayblend Makroblend    
     
PC/ABS  
Bayblend ET1100 (PC+ABS) blend; 10 % mineral filled; extrusion grade; very high heat resistance; Vicat/B 120 = 142 °C; reduced coefficient of thermal dilatation; tensile modulus = 3300 MPa.     
 Bayblend ET3032 FR Rubber modified PC blend; 10 % mineral filled; flame-retardant; extrusion grade; Vicat/B 120 temperature = 108 °C; good extrusion and vacuum-forming behaviour; UL 94 V-0 (0.75 mm) (Bayer internal test); halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 2.0 mm.      
 Bayblend FR3000 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; easy-flow grade; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability.     
 Bayblend FR3000 HI (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; general purpose; compared to FR3000 improved chemical resistance and stress cracking behavior; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 at 1.5 mm.    
  Bayblend FR3002 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 temperature = 99 °C; UL recognition 94 V-0 (1.0 mm); antimony- chlorine- and bromine-free flame retardant; no juicing; glow wire test (GWFI): 960 °C (2.0 mm); for notebooks and thinwall applications.     
 Bayblend FR3005 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; easy-flow grade; Vicat/B 120 temperature = 95 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability.     
 Bayblend FR3005 HF (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; very easy-flow grade; Vicat/B 120 temperature = 96 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant.     
 Bayblend FR3006 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; high heat resistance; Vicat/B 120 = 110 °C; easy flow; UL recognition 94 V-1 at 1.5 mm and V-0 at 2.0 mm; antimony-, chlorine- and bromine-free flame retardant.     
 Bayblend FR3008 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; improved chemical and hydrolysis resistance; HDT/A >= 85 °C; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability.     
 Bayblend FR3008 HR (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; improved chemical and very good hydrolysis resistance; HDT/A >= 85 °C; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability.     
 Bayblend FR3010 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 temperature = 110 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); improved chemical resistance and stress cracking behavior; successor to FR2010.     
 Bayblend FR3010 IF (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 temperature = 108 °C; improved flammability; UL recognition 94 5VB (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); improved flow compared to FR3010.     
 Bayblend FR3011 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; good flow; high heat resistance; Vicat/B 120 temperature = 118 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability.     
 Bayblend FR3020 (PC+ABS) blend; 5 % mineral filled; flame retardant; for thin-wall applications; injection molding; Vicat/B 120 = 103 °C; HDT/A >= 85 °C; very good UL recognition in small wall thicknesses (V-0 at 0.75 mm); antimony-, chlorine- and bromine-free flame retardant.     
 Bayblend FR3021 (PC+ABS) blend; 15 % mineral filled; flame retardant; injection molding grade; increased stiffness; tensile modulus = 4800 MPa; Vicat/B 120 temperature = 98 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); no juicing.     
 Bayblend FR3030 (PC+ABS) blend; unreinforced; flame-retardant; extrusion grade; Vicat/B 120 temperature = 115 °C; good extrusion and vacuum-forming behaviour; UL recognition 94 V-0 (1.5 mm); halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 1.0 mm.     
 Bayblend FR3100 TV (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; high heat resistance; Vicat/B 120 = 110 °C; improved impact strength and chemical resistance; UL recognition 94 V-1 at 1.5 mm and V-0 at 2.0 mm; antimony-, chlorine- and bromine-free flame retardant.     
 Bayblend FR3110 TV (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; high heat resistance; Vicat/B 120 = 110 °C; easy flow; UL recognition 94 V-1 at 1.5 mm and V-0 at 2.0 mm; antimony-, chlorine- and bromine-free flame retardant.     
 Bayblend FR410 MT Rubber modified PC blend; 10 % mineral filled; flame-retardant; injection molding grade; Vicat/B 120 = 108 °C; very good UL recognition in small wallthickness (V-0 at 0.75 mm); for railway interiors. The classifications according to the respective rail standards are communicated with email inquiry under [email protected]    
 Bayblend KU2-1514 (PC+ABS) blend; unreinforced; flame-retardant; high heat resistant injection molding grade; ball indentation temperature >=125 °C; Vicat/B 120 temperature = 136 °C; UL recognition 94 V-0 at 1.5 mm; antimony-, chlorine- and bromine-free flame retardant; suitable for supporting life components.     
 Bayblend KU2-1514 BBS073 (PC+ABS) blend; unreinforced; flame-retardant; high heat resistant injection molding grade; improved chemical resistance and stress cracking behavior compared to KU2-1514; ball indentation temperature >= 125 °C; Vicat/B 120 temperature = 136 °C; UL recognition 94 V-0 at 1.5 mm; antimony-, chlorine- and bromine-free flame retardant; suitable for supporting life components.     
  Bayblend T45 PG (ABS+PC) blend; unreinforced; general purpose injection molding grade; Vicat/B 120 temperature = 112 °C; for electroplating applications.     
 Bayblend T50 XF (PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 = 115 °C; excellent flow; good low temperature impact strength.     
 Bayblend T65 (PC+ABS) blend; unreinforced; general purpose injection molding grade; Vicat/B 120 temperature = 120 °C; good low temperature impact strength.     
  Bayblend T65 HI (PC+ABS) blend; unreinforced; grade with improved low-temperature impact strength and chemical resistance for automotive parts; also suitable for extrusion/extrusion blow molding and electroplating applications; Vicat/B 120 temperature = 120 °C.     
 Bayblend T65 XF (PC+ABS) blend; unreinforced; general purpose injection molding grade; Vicat/B 120 temperature = 120 °C; improved flowability compared to T65.     
 Bayblend T80 XG (PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 127 °C; excellent flow; optimized surface quality for metallization (steam treatment).     
 Bayblend T85 (PC+ABS) blend; unreinforced; general purpose injection molding grade; Vicat/B 120 temperature = 131°C; high impact and notched impact strength.     
 Bayblend T85 XF (PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; better flow than T85.     
 Bayblend T88 GF-10 Rubber modified (PC+SAN) blend; 10 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 5100 MPa; Vicat/B 120 = 134 °C.     
 Bayblend T88 GF-20 Rubber modified (PC+SAN) blend; 20 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 7200 MPa; Vicat/B 120 = 130 °C.     
 Bayblend T88 GF-30 Rubber modified (PC+SAN) blend; 31 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 10000 MPa; Vicat/B 120 = 134 °C.     
 Bayblend T90 (PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 127 °C; excellent flow., For thinwall technology applications.     
 Bayblend T90 HT (PC+ABS) blend; unreinforced; injection molding grade; high heat resistance; Vicat/B 120 = 135 °C; ball indentation temperature >= 125 °C; easy flow; suitable for supporting life components.     
 Bayblend T90 MF-20 Rubber modified (PC+SAN) blend; 20 % mineral filled; injection molding grade; very good flow; reduced coefficient of thermal dilatation; tensile modulus = 4900 MPa; Vicat/B 120 = 130 °C.     
 Bayblend T95 MF (PC+ABS) blend; 9 % mineral filled; injection molding grade; very high heat resistance; Vicat/B 120 = 142 °C; reduced coefficient of linear thermal expansion; tensile modulus = 3350 MPa.     
 Bayblend W85 XF (PC+ASA) blend; unreinforced; injection molding grade with improved weather resistance; optimized heat ageing stability; high heat resistance; Vicat/B 120 = 132 °C.
 
PC/PBT  PC/PET
Makroblend DP UT3905 (PC+PBT)-blend, high flow, impact modified, easy release, injection molding grade. Makroblend DP UT3905* offers superior flowability, good impact strength and excellent chemical resistance.     
 Makroblend DP UT3907 (PC+PBT)-blend, high flow, impact modified, easy release, UV-stabilized, injection molding grade. Makroblend DP UT3907* offers superior flowability, good impact strength and excellent chemical resistance.     
 Makroblend DP UT5005 (PC+PBT)-blend, impact modified, easy release, injection molding grade. Makroblend DP UT5005* provides an outstanding balance of low-temperature impact strength and flowability beside excellent chemical resistance.     
 Makroblend DP UT5007 (PC+PBT)-blend, impact modified, easy release, UV-stabilized, injection molding grade. Makroblend DP UT5007* provides an outstanding balance of low-temperature impact strength and flowability beside excellent chemical resistance.     
 Makroblend DP UT6005 (PC+PBT)-blend, impact modified, easy release, injection molding grade. Makroblend DP UT6005* offers an exceptional low-temperature impact strength, good flowability and excellent chemical resistance.     
 Makroblend DP UT6007 (PC+PBT)-blend, impact modified, easy release, UV-stabilized, injection molding grade. Makroblend DP UT6007* offers an exceptional low-temperature impact strength, good flowability and excellent chemical resistance.     
  Makroblend DP 2-7655 (PC+PET)-blends, impact modified, Injection molding grade 10% mineral filled, applications: automotive body panels     
  Makroblend DP 6015 (PC+PBT)-blend, impact modified, easy release, injection molding grade. Makroblend DP 6015* provides an outstanding balance of low-temperature impact strength and excellent chemical resistance having exceptional dimensional stability., application: manufacturing of toe caps.     
 Makroblend DP 7645 (PC/PET)-blends,impact modified, Injection molding grade, unreinforced, applications: automotive radiator grills     
 Makroblend DP 7665 (PC+PET)-blends, impact modified, Injection molding grade 20 % mineral filled, , applications: automotive body panels     
  Makroblend DP 7665 MBS162 (PC+PET)-blends, impact modified, Injection molding grade 20 % mineral filled, , applications: automotive body panels    
  Makroblend KU 2-7608 (PC+PBT)-blends, impact modified, Injection molding grade 10% mineral filled, applications: automotive body panels     
  Makroblend KU 2-7609 (PC+PBT)-blends, impact modified, Injection molding grade, 20% mineral filled, applications: automotive exterior body panels     
  Makroblend KU 2-7609 MBS058 (PC+PBT)-blends, impact modified, Injection molding grade, 18% mineral filled, applications: automotive exterior body panels     
  Makroblend KU 2-7912 (PC+PBT)-blends, impact modified, Injection molding grade, medium flow, high toughness at low temperatures, ideal for painted application, unreinforced, applications: automotive body panels     
  Makroblend KU 2-7912 MBS151 (PC+PBT)-blends, impact modified, Injection molding grade, medium flow, high toughness at low temperatures, ideal for painted application, unreinforced, applications: automotive body panels   
 Makroblend KU 2-7912/4 (PC+PBT)-blends, impact modified, Injection molding grade, high toughness at low temperatures, ideal for painted applications, unreinforced, applications: automotive body panels     
  Makroblend KU 2-7915 (PC+PBT)-blends, impact modified, Injection molding grade, excellent toughness at low temperatures, ideal for painted applications, unreinforced, applications: automotive internal and external body panels, bumpers, E/E power tools     
  Makroblend S 7916 (PBT+PC)-blends, impact modified, Injection molding grade, excellent chemical resistance, high toughness at low temperatures, ideal for painted applications, unreinforced, applications: motorcycle body parts     
  Makroblend S 7916/2 (PBT+PC)-blends, impact modified, Injection molding grade, excellent chemical resistance, high toughness at low temperatures, ideal for painted applications, unreinforced, applications: motorcycle body parts     
  Makroblend UT203 (PC+PET)-blend, impact modified, UV-stabilized, Injection molding grade     
  Makroblend UT235M PC/PET Blend, mineral filled, easy flow, low coefficient of linear thermal expansion, easy release, injection molding. Molded parts from UT235M having exceptional dimensional stability.    
 Makroblend UT250 PC/PET Blend, Impact modified, Easy release, Injection molding. Makroblend UT250 offers a good chemical resistance and flowability. Additionally, molded parts from UT250 having exceptional dimensional stability.    
  Makroblend UT305 PC/PET-Blend, easy release, injection molding. Makroblend UT305 offers an outstanding impact strength, chemical resistance and good flowability. Molded parts from UT250 provide a good surface appearance and exceptional dimensional stability, even in high moisture environments.    
  Makroblend UT4045G PC/PBT-Blend, 20% Glass fiber reinforced, easy release, injection molding. Makroblend UT4045G offers a high stiffness, excellent chemical resistance, good flowability and exceptional dimensional stability.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

公司主要经营:PPO|PC|PC/ABS|PBT|PPS|LCP|PA|PET|ASA|ABS|POM|TPR|PVC|AS|PS|PP|PE|TPU|EVA 
客服邮箱: [email protected]  客服电话:0769-87199012 传真:0769-87796540
公司地址:东莞市樟木头镇塑胶中心城D2号 Copyright © 2006 东莞同亿工程塑料有限公司 All Rights Reserved.
《中华人民共和国电信与信息服务业务经营许可证》编号:粤ICP备10055882号-3 您是第 访问者